How do I program my Hunter Pro C sprinkler system?

VIDEO

Simply so, how do I manually start my hunter sprinkler system?

X-Core - One Touch Manual Start and Advance

Hold down the arrow (>) button for 2 seconds. When you will see station 1 appear on screen, release the arrow (>) button.
This feature automatically defaults to program A.
The station number will be flashing.
Press the arrow (>) button scroll to the station you wish to begin with.

Also Know, what does no AC mean on a sprinkler system? The "NO AC" display is a diagnostic message telling you that the controller has stopped receiving AC power. The controller is running on the power supplied by the backup battery. Check the power source by plugging a lamp or radio into the wall outlet to verify there is power at the outlet.

In this manner, how do I manually start a hunter pro c sprinkler system?

Pro-C - One Touch Manual Start and Advance

With the dial in the RUN position, hold down the button for 2 seconds.
This feature automatically defaults to program A. You can select program B, or C by pressing the PRG program.
The station number will be flashing.
Press the button to scroll to the station you wish to begin with.

Which is better hunter or Rainbird?

Hunter products are slightly more durable than Rainbird. They can handle a greater PSI which is important when it comes to water pressure, winterization and extreme weather. Sprinkler heads sit in the ground which experience extreme temperatures. Hunter Controllers are way easier to program than Rainbird.

How far can I run sprinkler wire?

Most manufacturers include recommendations about what wire size to use with their valves, but typically, you can use 18-gauge wire if the length of the wire (not the distance) from the controller to the valve is less than 200 feet, and it's being installed as a residential system.

How do I reset my Hunter Pro C controller?

Press and release the RESET button on the right side of the controller. Wait 2 seconds and release the , and buttons. The display should now show 12:00am. All the memory has been cleared and the controller may now be reprogrammed.

Why does my sprinkler system run twice?

A common reason for a controller to repeat a cycle is too many programmed start times. When a station has completed its watering time, the controller will switch to the next station in that program automatically.

Why wont my sprinklers turn on?

The most common cause of individual sprinklers not coming on is blockage. The thin spray opening of a sprinkler head easily becomes clogged with dirt and debris. Inspect malfunctioning sprinkler heads while the water supply is off, and clear blockages with a thin, straight-edged tool such as a screwdriver.